- Ideal for use in outside areas (hobby, garden) thanks to durable construction; continuously good performance thanks to corrosion-free materials
- Completely preassembled system, simple installation and maintenance through Plug&Pump system and 360° rotatable display, which means that it can be read from any direction
- Electronic pump control
- High operational reliability thanks to dry-running protection
Jet FWJ
System
Design
Self-priming water-supply units
Application
For pumping water and rainwater from wells and tanks for:
- Sprinkling
- Irrigation and spraying
Equipment/function
- Directly flanged motor
- Connection cable with plug
- Thermal motor protection switch
- Automatic pump control
- Low-water cut-out switchgear
Type key
| Example: | FWJ-203-EM/3-2 |
| FWJ | Domestic water system with WJ pump and FluidControl |
| 2 | Rated flow rate Q in m³/h at optimum efficiency |
| 03 | Version 3 with higher pressure than version 2; no correlation with number of impellers |
| EM | Single-phase 230 V |
| /3 | Index of technical development |
| -2 | With IE2 motor |
Technical data
For Wilo-Jet FWJ:
- Mains connection: 1~230 V, 50 Hz
- Perm. inlet pressure: Max. 1 bar
- Start-up pressure: 1.5 bar
- Switch off volume flow: 95 l/h
- Perm. fluid temperature: +5 °C to +35 °C(+55 °C for 10 min)
- Perm. operating pressure: Max. 6 bar
- IP rating: IP44
- Discharge-side connection: R1
- Suction-side connection: G1
For the wibutler communication box:
- Standard communication/frequency: EnOcean / 868 MHz, Z-Wave / 868 MHz, Zigbee / 2.4 GHz, WLAN / 802.11 b/g/n 2.4 GHz
- Power supply:1~ 100 – 240 V AC / 50-60 Hz
- Plug type: EU plug
- Miscellaneous: Integrated loudspeaker, integrated 8 GB SSD, 1 GB DDR3-RAM, 1 GHz CPU ARMADA 370 ARM v7, 1 x Ethernet-RJ45, 1 x 3.5 mm stereo output
- Manufacturer: iEXERGY
Materials
- Pump housing made of 1.4301 stainless steel
- Impeller made of 1.4301 stainless steel
- Shaft 1.4005 stainless steel
- Mechanical seal made of carbon/ceramic
- Stage chambers made of Noryl
- Pressure monitor housing made of nylon PA6
- Diffuser/injector made of Noryl
- Seal made of NBR
Scope of delivery
- Wilo-Jet WJ pump
- Pump control Wilo-HiControl 1
- Installation and operating instructions for the Wilo-Jet WJ pump
- Installation and operating instructions for the Wilo-HiControl 1 switchgear
- Optional carrying handle
Accessories
- Suction hose set 1
- Shut-off ball cock Rp1
- Foot valve R11/4
- Non-return valve R1
Installation and operating instructions
Group Statement
Group Statement REACH
Article Number:
Issue date: 2021-05
Edition:
Language: language neutral
Download