SCPt

WILO Mather and Platt is very grateful for your interest in its products. The basic objective of this document is to provide instructions for maintaining and operating WILO Mather and Platt Horizontal Split Case pumps. Instructions are compiled for the person having a working knowledge of Horizontal Split case pumps and the pumps shall be installed under expert supervision and guidance.

WMPPPL shall not be liable for inaccurate installation, operation or maintenance of the product at site. The authorities/persons installing and maintaining the pump/s shall be responsible for hassle free installation operation or maintenance of the product. The performance of pump at site is dependent on-site conditions and is not in the control of WMPPPL.

Get a Quote

About this document

The language of the original operating instructions is English. All other languages of these instructions are translations of the original operating instructions.

These installation and operating instruction manual is an integral part of the product. It must be kept readily available at the place where the product is installed. Strict adherence to these instructions is a precondition for the proper use and correct operation of the product.

These installation and operating instructions correspond to the relevant version of the product and the underlying safety standards valid at the time of going to print. Supplied pump will operate trouble free and satisfactorily on the condition that, it is installed with due care and maintained properly.

If operating parameters deviate from the specified parameters as on the “Nameplate”, please contact manufacturer.”

2 Safety

These operating instructions contain basic information which must be adhered to during installation and operation. For this reason, these operating instructions must, without fail, be read by the service technician and the responsible operator before installation and commissioning. The machine operator list must be filled out completely. By signing this list, all persons working on or with the product confirms that they have received, read and understood this operating & maintenance manual.

It is not only the general safety instructions listed under the main point “safety” that must be adhered to but also the special safety instructions with danger symbolsincluded under the following main points.

General description

Limits of usage of the standard range The technical features of the product have been described in the offer made for this product, especially the fluid compatibility.

Description of the product

Split casing pumps are either single or two stages. They are of relatively simple construction, the casing being split along the pump axis so that normal maintenance work can be carried out without disturbing the position of either the pumping set or pipe work.

Casing

The pump casing is of volute form, cast in halves, which are bolted together along the pump axis. Gasket paper is provided between the split flanges of top and bottom casing. For accurate location casing halves, bearing housings / brackets etc. are located with dowel pins.

The suction and delivery branches of thepump are cast integral with bottom half casing, which also incorporate the mounting feet. Holes are tapped on suction and delivery branches for connecting the pressure gauges and providing casing drain. Bores of bottom half casing are grooved to provide location for stuffing box bushes. The top half casing carries connections for liquid seal for both sides. Air vent cock isfitted on the top and also priming hole is also provided on the top of casing

Group Statement

Group Statement REACH

Article Number:

Issue date: 2026-04-17

Edition:

Language: language neutral

Download

More Details

Wilo-SCPt