SCPV

The language of the original operating instructions is English. All other languages of these instructions are translations of the original operating instructions. These installation and operating instructions are an integral part of the product. They must be kept readily available at the place where the product is installed. Strict adherence to these instructions is a precondition for the proper use and correct operation of the product.

These installation and operating instructions correspond to the relevant version of the product and the underlying safety standards valid at the time of going to print. Supplied pump will operate trouble free and satisfactorily on the condition that, it is installed with due care and maintained properly.

For hassle free operating life, it is recommended that the pump should operate under specified “Operating conditions”. Pump operating conditions are mentioned on the “Nameplate” affixed to the pump. If operating parameters deviate from the specified parameters as on the “Nameplate”, please contact manufacturer.”

Get a Quote

Wilo is very grateful for your interest in its products. The basic objective of this document is to provide instructions for maintaining and operating Wilo Vertical Split Case pumps. Instructions are complied for the person having a working knowledge of Vertical Split case pumps and the pumps shall be installed under expert supervision and guidance.

With this document Wilo does not accept any liability for inaccurate installation, operation or maintenance of the product at site. The authorities that install and maintain the pump shall be
responsible for hassle free installation operation or maintenance of the product.

This document is prepared with at most care to ensure correct and accurate information, enabling the user to have trouble free installation and operational support. However, there can be few areas for improvement to make this document error free.

We welcome your valuable suggestions to make this document complete in all respects.

Safety

These operating instructions contain basic information which must be adhered to during installation and operation. For this reason, these operating instructions must, without fail, be read by the service technician and the responsible operator before installation and commissioning. The machine operator list must be filled out completely. By signing this list, all persons working on or with the product confirms that they have received, read and understood this operating & maintenance manual.

It is not only the general safety instructions listed under the main point “safety” that must be adhered to but also the special safety instructions with danger symbols included under the followingmain points

Transport and interim storage

Immediately check the pump and transport packaging for damage in transit upon receipt. Take the necessary steps within the period’s defined by the transport company in the event of damage in transit. DANGER! Risk of getting crushed! The installation or removal of the product must not be performed by one person alone. Measures should be taken to bar persons from standing beneath a suspended load. Furthermore, it is also prohibited to move suspended loads over exposed workplaces where people are present. The fastening devices should be adapted to the conditions at hand (weather, hooking system, load, etc.) Use suitable fastening devices to handle the weight of the product. CAUTION! Risk of damage to the pump! Risk of damage due to improper handling during transport andstorage. The pump should be protected against humidity, frost and mechanical damage during transport andinterim storage

More Details

Wilo – SCPV pumps

Article Number:

Issue date:

Edition:

Language: en

Download

Group Statement

Group Statement REACH